Hiring A Tiling Contractor

By: Danny Lipford

Laying mosaic tile border.

Even a small error in floor, wall or bath tile can be an eyesore. One minutely mispositioned tile, for example, can throw off the pattern and grout line, making the goof glaring. Worse, fixing a botched tiling job is expensive, disruptive and messy, especially if water has seeped through the grout and ruined framing, ceilings and finished walls.

That’s why hiring a seasoned professional and making sure the job gets done right the first time are essential. What’s more, certain applications might call for specialty tile, edging, grout, adhesive and backer board. These are best sorted out by an expert who knows what he’s doing.

Trolling For Tilers

Instead of getting prospects for contractors from retail tile stores, go where the pros go by checking at a tile supply store that caters to contractors. These outlets are more likely to know who does premium work.

Also, consider hiring a commercial contractor willing to take on residential jobs like yours. Because a large percentage of tiling goes into commercial buildings, these are the most experienced pros.

And politely decline any offers to do tiling on the cheap from a carpenter, laborer or other non-expert already working on your home.

Once you have a few names, start qualifying them by checking for current insurance as you would with any contractor. Look for tilers in business at least three years—the minimum needed to acquire an arsenal of specialty tools and a verifiable track record of quality work.

Next, ask the tilers for references. Here’s a case where simply looking at photos of past jobs isn’t enough—pictures can lie. Instead, nsist on seeing at least one previous installation in person.

Mosaic tile band in shower surround.

Spotting Quality Tile Work

When viewing a contractor’s past work on site, keep in mind that each ceramic or quarry tile is exactly the same size as the next. Look for consistent spacing between joints. And sight down grout lines to be sure they’re perfectly straight.

Focus on the tile layout next. Is it balanced? A good tiler begins in the center of a room so fractional tiles at opposite ends of the pattern end up the same size.

Also check doorways, windows and corners—especially odd-shaped angles in the baseboard or trim. Because custom-cutting tile is challenging at these trouble spots, they’re a good indication of a tiler’s skill.

Look for snug fitting tiles, and be wary of wide gaps with gobs of grout. Also check that tiles are tucked neatly beneath doorjambs, not butted against them, which looks terrible and creates an access point for water.

Finish your inspection by checking the wood and walls to be sure they’re free of splashed grout or water stains. Then ask the homeowner if the pro was neat and if sink and tub drains remained clear of washout; cleanup should always be done outside.

Also, find out whether the tile leaked or the grout cracked. If so ask if the tiler responded promptly and courteously to fix any problems without charge.

Another Way To Qualify Tilers

Ask if you can stop by a current job site. Once you’re there, get a sense of how organized the project appears. Because tilers have to work quickly to take advantage of mortars and adhesives with short drying times, neatness counts.

A seasoned professional will have tile stacked neatly by type, custom cuts done ahead of time, and a pattern map at hand so he isn’t stuck running to his truck for tools and materials.

Experienced tilers also do their tile cutting outside to minimize dust and messy backsplash from the wet saw. The contractor should keep the saw on a plastic tarp to protect the driveway or lawn and make sure the path between the cutting and work areas is protected with runners.

While you’re there, check that the tiler uses some type of plastic dust containment to seal the work area from the rest of the house. Also see that the contractor protects wood trim, a bathtub or an appliance with tape or a specialty coating if ongoing tile work abuts it.

Laying tile floor.

What Am I Bid?

Like what you see so far? Then let the bidding begin! To get a precise estimate, however, you’ll need to supply a scale pattern map and tile samples for the design and tile types you have in mind.

A draftsman or architect can convert your pattern ideas to a 1/4″ scale drawing for a fee of around $75. The tiler then uses the scale drawing to estimate labor and waste.

They should also warn you about potential pitfalls, such as specifying four specialty accent tiles that only come in boxes of 50, leaving you with an expensive 46-piece souvenir kit.

When the pro submits the bid, be sure he specifies 1/2″ thick cementitious backer board or a comparable synthetic product, with the seams taped with tiling adhesive. Then establish clear lines of responsibility by getting a written two-year guarantee against leaks.

If you’re having the shower tiled, you should have secured the same guarantee from your plumber, especially for the shower pan (the lead, galvanized or rubberized basin that catches any water seeping through shower tile grout). The pan should be thoroughly tested before the tiler arrives.

Tiling a bathtub surround.

Getting A Good Tile Job

Most tilers prefer supplying the materials themselves. Don’t worry. With their professional discount, they can often make a profit and charge you the same or less than you would pay for tiles at a home center. And with the many tile types, finishes, edge treatments, and porosity ratings out there, it’s better for the tiler to do the shopping. Plus, you want any material failure to be his responsibility, not yours.

Remember, you have a written guarantee that the tiler will stand behind his work. So it’s in his best interest to buy quality materials. Besides, failure of the tiles themselves is rare.

Once the tiler starts working, you may find that the pattern isn’t what you had in mind. It isn’t too late to rethink things if you act quickly. But you will end up paying double the installation fee, as well as for the labor to remove whatever tiles have been set.

This is all the more reason to think carefully about patterns and colors early on. Don’t walk on newly grouted tile for at least 24 hours (wait 48 hours for work done in a shower). Circulate air through the area with an air conditioner or fan to facilitate drying. If the grout cracks as it dries—a common problem—call the tiler back promptly for repairs.

Once final grouting is done, you can have grout seams sealed with silicone sealer for extra protection. The downside is you’ll have to reapply the sealer every six to eight months. An alternative is to leave the seams unsealed. If they get dirty, restore them to their original color with grout stain.

Pink bathroom wall tile demolition.

Wrecking Costs Extra

Most tiling bids include a demolition charge. If you have a strong back and an economical way to dispose of debris, you can save several hundred dollars by doing the demo yourself.

Beware, however, this is a hard, dusty chore that requires effective dust containment, dust masks, safety goggles, a mason’s chisel, pry bar, hammer, and large buckets for hauling out debris.

If you do the demolition yourself, ask the tiler exactly what has to be removed and how clean stud and floor surfaces have to be for him to begin work.

Print


Comments

Please Leave a Comment

2 Comments on “Hiring A Tiling Contractor”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.


  • Toni haskins Says:
    January 23rd, 2012 at 2:27 pm

    I am removing my old tile in the bathroom to replace with a new tile floor, am i also supose to remove the cement backer board also, and put in a new one? If i just remove the tile the netting on the cemant board comes up also, or the thin set is still on the cement board. What should i do? Thanks toni



  • mike foley Says:
    March 5th, 2011 at 10:34 am

    the advice you gave was extremely helpful thanks


We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.