917 How To Videos
DIY Kitchen Cabinet Wine Glass Display RackBy: Joe Truini
It’s easy to make a rack to store and display wine glasses beneath your hanging kitchen cabinets using standard T-molding, which is available at home centers for floor thresholds.
Here’s how to go about making a homemade wine rack:
- Fill Rack: Slide your wine glasses on the rack.
Watch this video to find out more.
- Kitchen Cabinet Door Rack (video)
- How to Make a Kitchen Cabinet Recipe Holder (video)
- How to Make a Kitchen Cabinet Hook for Bananas (video)
- How to Build a Pullout Trash Bin for Your Kitchen (video)
Please Leave a Comment
One Comment on “DIY Kitchen Cabinet Wine Glass Display Rack”
You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.
We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.
Sometimes the best kitchen storage idea is to hide something in plain sight, especially if it’s an attractive item like wine glasses. In this case I made a storage rack for the glasses on the underside of this cabinet. The nice thing is what I made it out of, which is T-molding.
This is a floor transition molding you can get at any home center store, and it’s made for transitioning from one type of floor to another. But if you look at it closely, you’ll see it’s T-shaped, so it’s perfect for sliding in. You mount it to the underside of the cabinet upside down, you can slide the glasses in.
I just took three pieces and cut them to 8½” long, drilled a hole in each end, and attached it with screws to the underside of the cabinet. Now for the spacing, I noticed that for these particular wine glasses, each rack had to be 2” apart. As it turns out the molding is exactly 2” wide, so I used it as a spacer block.
And now I can just slide the glasses in and they rest right on the T-molding. So not only did we solve a storage problem here, but it looks kind of cool, too.