Ask Danny Videos

How to Find Wall Studs Behind Bathroom Wall Tile

By: Danny Lipford

To find the location of wall studs behind a tile wall in a bathroom:

  • Use a standard stud finder above the tile, and plumb down from it.
  • Use a special deep sensor stud finder than can go through tile.

Watch this video to find out more.

Further Information

Print   Video Transcript

Antwon asks: I’m putting a grab bar in my parent’s ceramic tile shower. Is there an easy way to locate the studs without tearing out the tile?

Danny Lipford: It is fairly easy to find the wall stud in a wall, even behind ceramic tile like this, especially if the tile doesn’t go quite to the ceiling. You can use a stud finder like this, locate exactly where the stud is, level down, and you’ll know exactly where to attach your grab bar into that stud.

Now, if your ceramic tile goes all the way to the ceiling. Well, you can buy an enhanced stud finder, called a deep sensor type, that’ll go through the density of the ceramic and locate those wall studs. Now, make sure you use a long enough screw, so that you’re going through the tile and at least an inch and a half into the wall stud.

Now, a lot of times you’ll find a stud on one end of the grab bar and not be able to find it on the other end. That’s where you need a hollow wall anchor, like this, to secure the other end of the grab bar. That way the grab bar will be there for you when you need it.



Comments

Please Leave a Comment

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.