thc-36-repairing-bathroom-towel-bar

Repairing a Bathroom Towel Bar


When a towel bar in a bathroom isn’t attached directly to studs, it can often pull loose from the wall over time. Watch this video to find out how to repair a loose towel bar in your bathroom using toggle bolts. ...More



960 How To Videos

   page  3 of  54    

Repairing a Bathroom Towel Bar

By:

When a towel bar in a bathroom isn’t attached directly to studs, it can often pull loose from the wall over time. To repair a loose towel bar:

  1. Remove the exiting towel bar from the wall.
  2. Widen the holes in the wall to accept toggle bolts.
  3. Insert the toggle bolts in the holes in the wall.
  4. Tighten up the toggle bolts using a screwdriver.
  5. Reattach the towel bar on the hanging hardware.

Watch this video to find out more.

Further Information



Please Leave a Comment

One Comment on “Repairing a Bathroom Towel Bar”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  1. Tim Bowers Says:
    January 6th, 2016 at 1:18 pm

    Here’s my problem…I lost one of the MOUNTING metal pieces to the towel rack I wanted to mount.(2 1/8″ by 1″ old bracket)
    I’ve checked Home Depot and Lowes neither one has any usable mounting brackets. No name on towel bar or the one remaining bracket.

    Does this mean I have to buy a whole new rack? Or do you have any place else to check or what else can I use?
    Thanks for any help.

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.

When a towel bar won’t stay put because it isn’t mounted into the studs, one of the best solutions is a toggle bolt. First, insert the bolt through the mounting hole in the bar, and then thread on the spring loaded toggle. You may have to open up the hole in the wall a bit to accept the toggle before you squeeze it together and push it through.

Once the toggle opens up inside the wall, put a little outward pressure on the bolt as you begin to tighten it, in no time it will tighten up to hold the bar securely.