Today’s Homeowner

Globe Electric USB Port with Nightlight

USB Port with Built-In Nightlight

This plug has a built-in nightlight AND 2 USB charging ports. All the details are in this video.

Watch Video »


Using Hair Dryer to Warm Leather Before Conditioner

Easy Tip for Leather Conditioner

Leather conditioning oil doesn’t always soak into leather boots, furniture, etc. very well. But this tip is a quick way to ensure that it will!

Watch Video »


Simple Way to Check for Hard Water in Your House

How to Test for Hard Water

This quick test using dish soap lets you know if you have hard water in your home before you call in a professional for corrective steps.

Watch Video »


How to Replace Broken Window Pane

How to Replace Broken Window Pane

Replacing a broken pane doesn’t require a lot of effort or time. First start with removing the glazing around the broken pane and have a new piece of glass cut to size.

Watch Video »


Bosch Multi-Purpose DareDevil Drill Bits

Multi-Purpose Drill Bits from Bosch

These bits work equally well in wood, metal and masonary materials. Their sharp cutting edges are diamond ground so they can work at high speeds in even the hardest material.

Watch Video »


Trick for Cutting Crown Molding on Miter Saw

Trick to Cut Crown Molding on Angle

In order to properly make miter cuts in crown molding you have to turn it upside down on the miter saw table. The solution holds it at the proper angle every time.

Watch Video »


How To Glaze Cabinets for Inexpensive Update

Glazing Cabinets for an Inexpensive Update

An inexpensive way to update any cabinets in your house is to apply a glaze. You can find it in the paint aisle. Basically, all you do is brush it on and wipe it off. It gives your cabinets a warm, fresh look. This video shows you how!

Watch Video »


Drilling a Pilot Hole with a Nail for Molding

How to Drill a Pilot Hole with a Nail

Often when you’re driving finishing nails into moldings, the nail will split the wood unless you drill a pilot hole first. Here’s how to drill one with a finish nail for the perfect-sized hole every time.

Watch Video »