QUIKRETE Garage Floor Coating Epoxy Kit

Garage Floor Epoxy Coating

Sponsored message from

The garage is often one of the most overlooked spaces in a home, turning into a catch-all or overflow for storage. However, you can reclaim the space and transform your garage into a beautiful and functional addition with QUIKRETE two-part Epoxy Kit Garage Floor Coating. The kit is a cost effective solution that will leave your garage floor with a showroom quality high-gloss finish and exceptional durability.

To begin, be sure to prepare the surface by cleaning it thoroughly with the Cleaner, Etcher & Degreaser that comes in the QUIKRETE Garage Floor Coating Epoxy Kit. The Cleaner, Etcher & Degreaser not only cleans the surface, it ensures that the pores of the concrete will accept the coating and create a permanent bond.

After applying, allow the Cleaner, Etcher & Degreaser to work for about 60 seconds, then scrub the surface with a stiff bristle brush before rinsing with water. Then, mix the two-part epoxy together and immediately start the application process.

First use a small bristle brush to apply the coating around the trim of the room before using a roller or brush to apply over the full surface. After completing a two-foot by six-foot area, dispense the color flakes found in the kit for added decorative flare. Repeat the process until the entire garage floor is covered.

For best results, consider a day with a temperature above 45 degrees Fahrenheit but under 90 degrees to assure the mixture dries properly.

To increase the level of protection and shine to the garage floor, consider applying QUIKRETE High-Gloss Coating the next day.

For more in-depth product information and step-by-step project videos visit QUIKRETE.com.


Please Leave a Comment

5 Comments on “QUIKRETE Garage Floor Coating Epoxy Kit”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  • Official Comment:

    Thomas Boni Says:
    July 23rd, 2019 at 4:19 pm

    Hi, Larry,
    It’s a popular expression because it so often rings true: “Better safe than sorry!”
    While you may not have parked a car in the garage or used it, cleaning the floor with Quikrete Cleaner, Etcher & Degreaser not only cleans the surface, it also ensures that the pores of the concrete will accept the coating and create a permanent bond.
    Thirty days is a long time, so it’s probably best to go ahead and prep that surface.
    Good luck!

  • larry Says:
    July 21st, 2019 at 3:33 pm

    i have brand new garage and newly poured floor, it is about 30 days since we poured concrete, do i have prep the surface? it is very smooth finish now.. we haven’t parked a car in it yet or used it

  • Jose Bautista Says:
    April 26th, 2018 at 5:42 am

    Do you have chemical resistant epoxy coating? we’ll be applying this coating to the haz-waste storage bay floor.

  • Jerry W Woods Jr Says:
    September 2nd, 2017 at 12:33 pm

    The contractor didn’t mix it correctly the floor is still sticky after 2 weeks. He’s using fans to dry will that work?

  • Debbie Flinn Says:
    August 22nd, 2017 at 6:43 pm

    Used your product as directed while applying 2nd coat had door open and rain hit part of floor already painted 2 days ago. Floor starting to bubble and peel ? Why? Makes me wonder what will happen when vehicle is in garage ?

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.

 characters available

QUIKRETE Garage Floor Coating Epoxy Kit