Completing a Kitchen After 20 Years
For the last 20 years, this house has been home to the Estes family. Now, Chris and Michelle’s daughter, Kaitlyn, is off at college and they have the place to themselves.
And they have some time to focus on a long-awaited kitchen renovation — and we’re here to guide that project along!
The couple installed laminate countertops about 15 years ago and they want to replace them with butcher block that they’ve already purchased.
First, we need to size the wood. Ordinarily, we’d freehand crosscuts, but not on a countertop. Its edges have to be perfect so we’re using a saw edge guide from Woodcraft to cut them as straight as an arrow.
After we complete cuts for the countertop sections, we also cut a piece of the butcher block for the bar section. Then we’re ready to dry fit them.
Before we install the countertops, we take them outside to sand them with 320-grit sandpaper, stain them with Beltex pads and wear our respirators to finish them with Waterlox Original Sealer / Finish.
Install apron sink
We’re adding a stainless steel apron sink that will require removal of the front of the counter in order to fit.
So we put the countertop’s seam right in the middle because the sink will be cut out from the front, and just a tiny seam in the back of the sink will be visible.
Once the sink is cut out, we mark the cabinets to accommodate the sink’s depth.
You May Also Like:
|Completing a Kitchen After 20 Years||Completing the Outdoor Kitchen Project||Renovating the Kitchen for Keeps||Choosing Kitchen Flooring|