Simple Solutions

How to Remove Stuck Headless Nails from Wood

By: Joe Truini
Removing nails

Removing nails with a hammer is easy, but what can you do when the nails are headless? Here’s the Simple Solution. (DepositPhotos)

To remove finishing nails or nails that have the head broken off:

  1. Place a block of wood next to the nail to provide leverage for the hammer and protect the board.
  2. Position a pry bar or hammer around the nail.
  3. Clamp locking pliers on the nail to keep the hammer or pry bar from slipping.
  4. Pull back on the hammer or pry bar to remove the nail.

Watch this video to find out more.

Further Information

Video Transcript

You know professional carpenters have to yank out nails occasionally, because either they’ve driven them in the wrong place, or maybe the nail bent over, or when they’re salvaging a piece of lumber and they want to remove the nail. Now you’ve probably seen this technique before where you use a couple of wood blocks as leverage which helps you pull out a nail. Or this is a technique I like to use sometimes, just rock the head of the hammer back and forth; and little by little, you’ll have to reposition, but little by little it will pull out the nail. Now the problem with that is that it can mess up the board.

Now, here’s a technique – well, first of all, neither of these techniques will work in a situation like this where you have a headless nail, the nailhead broke off, or you’re using finishing nails which have tiny heads. So here’s the trick. Take a block of wood, so you can protect the workpiece, and get a pair of self-locking pliers. What you want to do is slip the claw over the nail shaft, then clamp on the pliers. What you’re effectively doing is just pulling on the pliers, and you’ll yank the nail right out.


Please Leave a Comment

7 Comments on “How to Remove Stuck Headless Nails from Wood”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  • Donna Says:
    July 28th, 2019 at 6:40 am

    What if the nails are too small/short to reach past the hammer with the pliers?

  • Jo Says:
    June 30th, 2019 at 9:02 am

    Why not just use pincer?

  • Allison Says:
    November 5th, 2017 at 4:09 pm

    Thank you for your tip on finishing nails! It helped me spare some trim and the whole process went so much faster!

  • Doug Says:
    September 23rd, 2017 at 12:41 am

    I have an old cabinet from Mexico. I would like to refurbish it. The hinges look like they have been made by a blacksmith. Square nails are used to attach the hinges to the cabinet. I need to remove some square nails so I can move the hinges from the bottom cabinet to complete the look of the top part of the cabinet doors. What is the best way to remove these very secured nails from the wood without causing damage?

  • Jim Says:
    September 21st, 2017 at 10:07 am

    how to best remove staples that were installed with a gun?

  • Paige McConnell Says:
    June 10th, 2017 at 8:12 pm

    Genius! Saved the day with your tutorial on how to remove a headless nail! Thank you!

  • Casey Says:
    October 26th, 2016 at 10:31 am

    But what if the headless nail is like right in the wood? or any nail… Then what do I do!

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at

 characters available

How to Remove Stuck Headless Nails from Wood