Home Improvement Expert Danny Lipford

470-ss-diy-flexible-caulking-tube-nozzle-entension

DIY Flexible Caulking Tube Nozzle Extension


Watch this video to find out how to make a flexible caulking tube nozzle extension from a drinking straw and duct tape to allow you to apply caulking in hard to reach areas. ...More




    First Page
   page  1 of  48    

DIY Flexible Caulking Tube Nozzle Extension

By:
Making a flexible caulking tube nozzle extension with a straw and duct tape.

Making a caulking tube nozzle extension from a straw and duct tape.

To make a flexible caulking tube nozzle extension:

  1. To allow for easy flow through the straw, make sure the caulking is at room temperature or above.
  2. Cut the end of a flexible drinking straw so it fits into the nozzle on a caulking tube.
  3. Wrap a piece of duct tape around the joint between the straw and caulking tube nozzle.
  4. Insert the straw into the area to be caulked and pull the trigger on the caulking gun.

Watch this video to find out more.

Further Information



Please Leave a Comment

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.

Notify me of followup comments via e-mail. You can also subscribe without commenting.


Danny Lipford: How can an ordinary drinking straw and a roll of duct tape help you out on your caulking chores? Well, Joe will tell you how.

Joe Truini: How you doing, Danny?

Danny Lipford: Good.

Joe Truini: In this case I’ve got a large gap behind this exterior door trim. So I need to fill it with some caulk, because water’s been running down there and blistering off the paint. But if you use a typical gun with a cartridge, you can’t reach in there because this light fixture is in the way.

What I’ve done is I’ve modified the caulking cartridge by adding a flexible drinking straw—simply duct taped it right to the nozzle. What that allows me to do is apply caulk directly into the crack. Not only can I reach it now easily, but you can see I can now feed the straw all the way in there and deliver caulk way back there where you really need it.

Danny Lipford: Now I can think of a number of applications where you can use that on the interior as well.

Joe Truini: Yeah. I’ve used this to apply caulk behind windowsills where it would have been impossible to reach from the inside because it was back four or five inches.

Danny Lipford: Now one of the things Joe had to do in modifying the actual end of the tube, is he had to cut the end of the drinking straw a little bit to allow it to position over the caulking tube itself. Then the duct tape held it in place so that it would flow real easily.

Also, another great tip, anytime you’re caulking, make sure your caulking tubes are at least at room temperature or a little warmer, and that will allow the caulking to flow a lot better and make your job a lot easier.