Home Improvement Expert Danny Lipford

774-5-protecting-wood-deck-stain

Protecting a Wood Deck with Stain


Cleaning and staining a wood deck seals out water and dirt and protects the wood from UV rays and mildew so it will last longer and look better. Watch this video for more. ...More




    First Page
   page  1 of  34    

Protecting a Wood Deck with Stain

By:

Staining a wood deck with a quality deck stain:

  • Keeps rain and moisture from penetrating into the wood.
  • Seals the pores to keep out dirt.
  • Reduces cracking and splitting.
  • Helps prevent mildew from forming.
  • Gives the wood a uniform color and finished look.

When staining a wood deck:

  1. Clean Deck: Before staining a wood deck, clean it first with a deck cleaner, such as Flood Cleaner/Brightener, scrubbing the surface to remove any dirt or stains.
  2. Allow Deck to Dry: Allow the wood to dry for several days before staining, unless you’re using a product like Flood OneCoat, which can be applied to the deck when the wood is still damp.
  3. Stain Deck: When rolling or spraying stain, come back with a paintbrush while the stain is still wet, and brush the stain into the wood so it will penetrate into the pores.

Watch this video to find out more.

Further Information



Please Leave a Comment

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.

Notify me of followup comments via e-mail. You can also subscribe without commenting.


Danny Lipford: Now, just as the sun can damage your skin, it can also damage those natural fibers like wood outside on your wood deck. So, it needs to have somewhat of a sunscreen to protect it.

For a deck that comes in the form of a wood stain which beautifies the wood and prolongs its life. New wood needs a little time to cure before it’s stained. So check it by pouring a cup of water on the surface to see if it’s absorbed within 30 seconds or so.

Before staining, the surface needs to be cleaned well to prepare it. A concentrated cleaner/brightener mixed with water is a great way to get it ready. Apply it to the wood and scrub it in with a stiff bristle nylon brush. Then let it sit for 20 or 30 minutes before rinsing it all off.

Normally you would need to let the wood dry for two or three days before applying the stain, but this new product called OneCoat from Flood can be applied while the wood is still damp. Whether you roll it on or spray it on, be sure to back brush the stain so that it works it down into the pores of the wood. This is part of the protection it provides. Besides blocking the sun’s UV rays, the stain also seals these pores, preventing water from entering them and leading to earlier decay.

One of the side benefits of staining your deck is because you’re sealing off the pores you’re also going to be discouraging any dirt from getting down in the pores. That means the deck will stay a lot cleaner for a lot longer.