Home Improvement Expert Danny Lipford

553-ss-screed-board

How to Make a Screed Board


Whether you’re creating a brick landing for a new set of steps or forming a small brick path, you first need to use a screed to level and smooth the surface. Watch this video to find out how to make a screed. ...More




    First Page
   page  1 of  49    

How to Make a Screed Board

By:

Whether you’re creating a brick landing for a new set of steps or forming a small brick path, the trick is to get a nice sub surface to support the bricks. You’ll need a nice smooth surface but also one with a consistent depth, otherwise some bricks may be higher or lower than others creating a tripping hazard.

To make a smooth surface, create a screed (the same tool concrete finishers use to smooth out concrete). We used a section of 1×4 with a small strip of wood screwed to the back. The distance from the bottom of the strip of wood to the bottom of the screed is the thickness of the brick less about a 1/4″.

Your strip of wood should be long enough to extend over the edges of your form while the 1×4 should be short enough to fit inside the form. Run your screed board over the crushed stone/sand along the formwork edges to smooth the surface.

Further Information



Please Leave a Comment

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at todayshomeowner.com.