How-To Videos

How to Trim Lattice Around a Deck Foundation

By: Danny Lipford

Enclosing the foundation of a deck with lattice gives a finished appearance that enhances the look of your home. By making one or more of the lattice panels removable, the space under the deck can also be used for storage.

To trim out the lattice, 1” x 4” boards were mitered around the perimeter of the lattice panels to cover the raw edges and hide any joints in the lattice that don’t line up. Here are some tips to keep in mind when framing around lattice:

  • When possible, install the trim to the lattice panels before attaching the lattice to the deck foundation.
  • Make sure the trim is plumb and level, even if the ground isn’t.
  • Attach the lattice to the back of the trim boards using short screws.
  • For easy access beneath the deck for storage, attach one or more of the lattice panels to the deck joists with galvanized bolts and wing nuts.

Watch this video to find out more.


Please Leave a Comment

One Comment on “How to Trim Lattice Around a Deck Foundation”

You can follow comments to this article by subscribing to the RSS news feed with your favorite feed reader.

  • Richard Cotterman Says:
    January 8th, 2017 at 10:20 am

    Thank for you tips on lattice install, but I still have two issues I can’t seem to find online help with. 1. The ground beneath my deck is on a very steep slope/angle. . How do I trim the bottom of the lattice so that it stays at ground level on the steep slope. 2. I would like to put some type of screen behind the lattice due to the numerous wasp that we have , since we live in a very wooded area of NW Arkansas. Thank you, Richard

We want to hear from you! In addition to posting comments on articles and videos, you can also send your comments and questions to us on our contact page or at (800) 946-4420. While we can't answer them all, we may use your question on our Today's Homeowner radio or TV show, or online at

 characters available

How to Trim Lattice Around a Deck Foundation